Metal plate parts in stainless steel

Old ads will stay here for a while before being kicked out forever after 6 months or so.

Moderators: scimjim, Roger Pennington, philhoward, Lukeyboy46, erikscimitardemon, Terry Rickard

Locked
Roy McBride
Posts: 4
Joined: Mon Oct 29, 2018 1:46 pm

Metal plate parts in stainless steel

Post by Roy McBride » Mon Oct 29, 2018 2:22 pm

I have been doing remanufactured steel plate parts for the Hillman Imp, the car is now as complete as I can make it.

If anyone wants Reliant Scimitar GTE or other parts CNC cutting in either mild or 304 or 316 grade stainless steel please contact me.
Attachments
40311499_278905656049024_7235623234819850240_n.jpg
40311499_278905656049024_7235623234819850240_n.jpg (94.31 KiB) Viewed 3512 times



Roy McBride
Posts: 4
Joined: Mon Oct 29, 2018 1:46 pm

Metal plate parts in stainless steel

Post by Roy McBride » Mon Oct 29, 2018 2:28 pm

These are 304 grade stainless steel engine lift eyes, I can CNC cut most shapes given the sizes and a drawing.
I no longer have a Reliant Scimitar but I do have the service books and GW parts book.
Attachments
40337131_278905726049017_1790504142658076672_n.jpg
40337131_278905726049017_1790504142658076672_n.jpg (94.5 KiB) Viewed 3505 times



gtcse8
RSSOC Member
Posts: 3083
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales

Metal plate parts in stainless steel

Post by gtcse8 » Wed Feb 20, 2019 6:09 pm

Hi Roy

What`s the max thickness of your lazer?.

PM sent

Mark


Mark Wilson. Garage sale everything must go. :cry:1 SE6b, 1 GTC Shell &1 SE6a shell & a Triumph Daytona. Also on YouTube :wink: lookup V8 Chevy https://youtu.be/lbpvDGAMY6g https://youtu.be/7xTrbr0ETSA https://youtu.be/K7HfYVd5Flo

roymck
Posts: 1158
Joined: Tue Mar 24, 2009 11:33 am
Location: Dorking Surrey

Metal plate parts in stainless steel

Post by roymck » Wed Feb 20, 2019 6:32 pm

I think there is a need for bumper brackets and the bumper corner brackets in Stainless steel . Used to be available but not seen them advertised for some time now .



gtcse8
RSSOC Member
Posts: 3083
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales

Metal plate parts in stainless steel

Post by gtcse8 » Wed Feb 20, 2019 6:49 pm

Roy I have the bumper corner brackets in stock.
Mild Steel but painted in Zinc rich primer.
I think I have about 6 sets left out of the last batch I did.
Mark


Mark Wilson. Garage sale everything must go. :cry:1 SE6b, 1 GTC Shell &1 SE6a shell & a Triumph Daytona. Also on YouTube :wink: lookup V8 Chevy https://youtu.be/lbpvDGAMY6g https://youtu.be/7xTrbr0ETSA https://youtu.be/K7HfYVd5Flo

Toecutter
Posts: 68
Joined: Sat Jan 23, 2016 8:43 pm
Location: Risby, Suffolk

Metal plate parts in stainless steel

Post by Toecutter » Sat Feb 23, 2019 5:40 pm

Hi,

Do you still have the sill repair sections available for the se5a?

Thanks.



gtcse8
RSSOC Member
Posts: 3083
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales

Metal plate parts in stainless steel

Post by gtcse8 » Sun Feb 24, 2019 8:36 am

Yup

I replied to you on Jan 2nd and the message is still unread in your PM

Mark


Mark Wilson. Garage sale everything must go. :cry:1 SE6b, 1 GTC Shell &1 SE6a shell & a Triumph Daytona. Also on YouTube :wink: lookup V8 Chevy https://youtu.be/lbpvDGAMY6g https://youtu.be/7xTrbr0ETSA https://youtu.be/K7HfYVd5Flo

Toecutter
Posts: 68
Joined: Sat Jan 23, 2016 8:43 pm
Location: Risby, Suffolk

Metal plate parts in stainless steel

Post by Toecutter » Sun Feb 24, 2019 2:12 pm

Awfully sorry. Bare with...



Locked

Return to “Removed For Sale and Ebay”