Door Lock Catcher Plate Philips Bit Size.

Discuss and exchange views and technical information about our cars.

Moderators: scimjim, Roger Pennington, philhoward, Lukeyboy46, erikscimitardemon

Post Reply
ozscim
RSSOC Member
Posts: 141
Joined: Sat Oct 07, 2006 3:21 am
Location: Perth, Western Australia

Door Lock Catcher Plate Philips Bit Size.

Post by ozscim » Mon Jun 04, 2018 7:35 am

Hi All,
Trying to adjust my passenger door catcher plate, but a no 4 Philips bit slips when attempting to tighten up!
Anyone know what size of bit is required, to get a good grip on the screws???
Cheers Neil.
P.S. I cannot find a No5 Philips bit listed anywhere.



User avatar
peter freeman
RSSOC Member
Posts: 10667
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Contact:

Door Lock Catcher Plate Philips Bit Size.

Post by peter freeman » Mon Jun 04, 2018 7:41 am

Could be that its not a phillips just a straight cross head - might be worth fitting new screws anyway as they are bound to be past their best.



User avatar
philhoward
RSSOC Member
Posts: 27670
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Contact:

Door Lock Catcher Plate Philips Bit Size.

Post by philhoward » Mon Jun 04, 2018 10:37 am

Philips or Posidrive? There's a difference:
PHorPZ.png
PHorPZ.png (118.88 KiB) Viewed 502 times


Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
SS1 Racer
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

Post Reply

Return to “General Technical Discussion”