Cologne rocker covers

Discuss and exchange views and technical information about our cars.

Moderators: scimjim, Lukeyboy46, erikscimitardemon, Roger Pennington, philhoward

Post Reply
RSSOC Member
Posts: 34
Joined: Thu Sep 01, 2016 4:13 pm
Has thanked: 13 times

Cologne rocker covers

Post by PeteS » Thu Aug 08, 2019 12:54 pm

I am renovating my cologne rocker's many years since I have replaced cork gaskets ....any tips or recommendations regarding any sealants to use or are they best fitted without?

User avatar
Dennis Nicholas
RSSOC Member
Posts: 737
Joined: Wed Jun 20, 2007 1:22 pm
Location: Devon
Has thanked: 64 times
Been thanked: 37 times

Cologne rocker covers

Post by Dennis Nicholas » Sat Aug 10, 2019 11:30 am

I remember the usual recommendation is just a smear of grease both sides. The cork ones will settle over time so need checking and gentle tightening down at times.


Dennis Nicholas(RSSOC)
1980 GTC Trafalgar Blue, 2010 basic Skoda Yeti (petrol), Austin 7s, Rileys.

RSSOC Member
Posts: 2867
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 79 times
Been thanked: 212 times

Cologne rocker covers

Post by gtcse8 » Sat Aug 10, 2019 6:43 pm

Spray Adhesive on the cleaned covers.
Or, contact adhesive.
Then press the gaskets into place using the bolts through the top holes to keep the gaskets in position till the glue sets.
It stops the gaskets creeping and if they not perfectly flat it holds the gasket in place.

I have a pair of Used Chromed covers, and a set of NEW covers in original Ford grey/

Mark Wilson. Garage sale everything must go. :cry:2 SE6b`s, 1 GTC shell+1 SE6a, Triumph Daytona, Honda CB750 K7. Also on YouTube :wink: lookup V8 Chevy

Post Reply

Return to “General Technical Discussion”