Fibreglass Dash Crash pad Replacement

Moderators: scimjim, Lukeyboy46, Roger Pennington, philhoward, erikscimitardemon

Post Reply
PTKENNY
RSSOC Member
Posts: 1
Joined: Sat Jul 20, 2019 11:35 am

Fibreglass Dash Crash pad Replacement

Post by PTKENNY » Sun Jul 21, 2019 9:38 am

Does anyone know if someone makes a fibreglass replacement for the SE 6 dash crash pad. my car's original pad is warped thus I would like to replace it a non warping crash pad.



User avatar
Coupe Racing
RSSOC Member
Posts: 7353
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Has thanked: 19 times
Been thanked: 94 times

Fibreglass Dash Crash pad Replacement

Post by Coupe Racing » Sun Jul 21, 2019 11:06 am

There is an effective repair method available
Involves cutting the underside and rebonding


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

User avatar
scimmy_man
RSSOC Member
Posts: 1800
Joined: Fri Jan 04, 2008 7:07 pm
Location: selby yorkshire
Has thanked: 5 times
Been thanked: 35 times

Fibreglass Dash Crash pad Replacement

Post by scimmy_man » Sun Jul 21, 2019 11:41 am

isnt the point of a crash pad that its soft when you headbut the thing?


I've taken a vow of poverty ...... Annoy me by sending me money!!

User avatar
philhoward
RSSOC Member
Posts: 25270
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Has thanked: 64 times
Been thanked: 632 times
Contact:

Fibreglass Dash Crash pad Replacement

Post by philhoward » Sun Jul 21, 2019 12:06 pm

scimmy_man wrote:
Sun Jul 21, 2019 11:41 am
isnt the point of a crash pad that its soft when you headbut the thing?
Well, yes.

There is a 6a with one made out of a very large chunk of wood...


Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

User avatar
scimmy_man
RSSOC Member
Posts: 1800
Joined: Fri Jan 04, 2008 7:07 pm
Location: selby yorkshire
Has thanked: 5 times
Been thanked: 35 times

Fibreglass Dash Crash pad Replacement

Post by scimmy_man » Sun Jul 21, 2019 4:05 pm

er yea.........


I've taken a vow of poverty ...... Annoy me by sending me money!!

mark rudder
RSSOC Member
Posts: 117
Joined: Thu Dec 21, 2017 6:05 am
Has thanked: 22 times
Been thanked: 1 time

Fibreglass Dash Crash pad Replacement

Post by mark rudder » Wed Jul 24, 2019 1:54 am

Depends how bad it is, I just leave a 2lb lump hammer on some rag, on the dash when parked,
works a treat.


Mark from down under.
Current GTE 6B, Dolomite Sprint, Scirocco R. Past XJS (manual), V12 E-type (manual, convertible, lovely) 350 chev XJ6, TR6, TR4, Sprite, Midget, local Ford V8s, others... There's a pattern here.….

gtcse8
RSSOC Member
Posts: 2025
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 22 times
Been thanked: 136 times

Fibreglass Dash Crash pad Replacement

Post by gtcse8 » Wed Jul 24, 2019 8:19 am

If you obey the current Laws and wear a seat belt you should not get anywhere near the crashpad :?:

Some years ago while travelling through Bradistan at 30mph a person in a VW VR6 decided to pull out of a side road to do a Right turn and push his way into the moving traffic. :evil:
As I was blindsided by other obstacles and didn`t see him till the last second, I hit his drivers door and front suspension.
Smashed his fancy alloy into bits and spun him round to 45 degrees.
Only major damage to the Scim was the front skirt was wrecked.
The seat belt did its intended and I was totally unhurt. :lol:

His wallet wasn`t after we had been to court as he claimed against MY insurance stating I was at fault.
Apart from the obvious, that he had pulled out on ME, the Judge was very happy to look at the pictures of the scene I took.
The one from the road he had pulled out from had A rather large STOP sign placed at the junction.
Needless to say Mr Malik, or his legal team, never turned up in court and the Judge found in my favour, even awarding the cost of the film and development. :lol:


Mark Wilson. See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s,1 & 1/2 GTC`s, SST 1800Ti & not a lot of sense

Steve_S
Posts: 87
Joined: Mon Apr 16, 2018 5:47 pm
Location: Nr Derby
Has thanked: 2 times
Been thanked: 1 time

Fibreglass Dash Crash pad Replacement

Post by Steve_S » Fri Jul 26, 2019 8:13 pm

Coupe Racing wrote:
Sun Jul 21, 2019 11:06 am
There is an effective repair method available
Involves cutting the underside and rebonding
Coupe Racing wrote:
Sun Jul 21, 2019 11:06 am
There is an effective repair method available
Involves cutting the underside and rebonding
Any chance you could expand on that please ?



User avatar
Coupe Racing
RSSOC Member
Posts: 7353
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Has thanked: 19 times
Been thanked: 94 times

Fibreglass Dash Crash pad Replacement

Post by Coupe Racing » Fri Jul 26, 2019 9:14 pm

Drop me an email please or search the forum


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

Post Reply

Return to “Se6/6a/6b/GTC”