se4b wiring loom

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46

Post Reply
stefan
Posts: 2
Joined: Mon Jun 19, 2017 11:37 am

se4b wiring loom

Post by stefan » Mon Jun 19, 2017 12:42 pm

Hi dose any one know were I can find new wiring loom for my coupe.
Its in bits at the moment and one that is all in one would be better.



User avatar
peter freeman
RSSOC Member
Posts: 9220
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 291 times
Contact:

Re: se4b wiring loom

Post by peter freeman » Mon Jun 19, 2017 1:30 pm

Apart from QRG who may have one I don't know of anyone with one. Best probably to replace one for one from reels of wire. The Coupe wiring is not that complicated - just takes time.



User avatar
Coupe Racing
RSSOC Member
Posts: 6936
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Has thanked: 6 times
Been thanked: 74 times

Re: se4b wiring loom

Post by Coupe Racing » Mon Jun 19, 2017 2:17 pm

www.autosparks.co.uk

Do them but in my personal experience they are expensive poorly made rubbish with poor after sales support which is needed when the loom is wrong

If desperate then they could be a last resort as I know they do one version of the Coupe loom


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

stefan
Posts: 2
Joined: Mon Jun 19, 2017 11:37 am

Re: se4b wiring loom

Post by stefan » Mon Jun 19, 2017 6:44 pm

Thank I will look at then.

Have the scimitar when it came to me
scimitarSE4.htm.jpg



User avatar
peter freeman
RSSOC Member
Posts: 9220
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 291 times
Contact:

Re: se4b wiring loom

Post by peter freeman » Mon Jun 19, 2017 6:52 pm

probably got from here if its in colour. - https://www.scimitarweb.co.uk/~nenoggins/Wiring.htm



User avatar
Coupe Racing
RSSOC Member
Posts: 6936
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Has thanked: 6 times
Been thanked: 74 times

Re: se4b wiring loom

Post by Coupe Racing » Mon Jun 19, 2017 7:41 pm

Hi Peter
that link did not work for me


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

User avatar
peter freeman
RSSOC Member
Posts: 9220
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 291 times
Contact:

Re: se4b wiring loom

Post by peter freeman » Mon Jun 19, 2017 8:35 pm

It should do - send me your email address to peterlfree@outlook.com and I will send the drawing to you - which drawing do you want ? as they are all there.



User avatar
scimjim
RSSOC Member
Posts: 35095
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester
Has thanked: 112 times
Been thanked: 770 times

Re: se4b wiring loom

Post by scimjim » Mon Jun 19, 2017 8:48 pm



Jim King

Current: SE5 (8Ball), TI SS1 (snotty), 1600 SS1 (G97), 1600 SS1 (C686CCR), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre
Chief mechanic for: 1400 K series SS1 (Megan3), 1400 CVH EFi SS1 (Grawpy), Sabre/MX5 auto (The Flying Broomstick),
1300 SS1 (Number One) & Sarah's coupe.
CURE THE FAULT - NOT THE SYMPTOMS

User avatar
peter freeman
RSSOC Member
Posts: 9220
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 291 times
Contact:

Re: se4b wiring loom

Post by peter freeman » Mon Jun 19, 2017 8:54 pm

Missing the S - I thought it was now needed with the club link.



User avatar
scimjim
RSSOC Member
Posts: 35095
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester
Has thanked: 112 times
Been thanked: 770 times

Re: se4b wiring loom

Post by scimjim » Mon Jun 19, 2017 9:07 pm

I'm not sure if that's why Steve is having the problem (s for secure site)?


Jim King

Current: SE5 (8Ball), TI SS1 (snotty), 1600 SS1 (G97), 1600 SS1 (C686CCR), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre
Chief mechanic for: 1400 K series SS1 (Megan3), 1400 CVH EFi SS1 (Grawpy), Sabre/MX5 auto (The Flying Broomstick),
1300 SS1 (Number One) & Sarah's coupe.
CURE THE FAULT - NOT THE SYMPTOMS

User avatar
Roger Pennington
RSSOC Member
Posts: 19112
Joined: Tue Aug 29, 2006 9:43 pm
Has thanked: 107 times
Been thanked: 438 times

Re: se4b wiring loom

Post by Roger Pennington » Mon Jun 19, 2017 9:59 pm

Both links work for me (though I do get the "insecure site" warning with the link without the "s" (as you'd expect) :)


....Roger

RSSOC member (since 1982)
- - - - - - - - - - - - - - - - -
Image

"Condition can be bought at any time; Originality, once lost, is gone forever" - Doug Nye

User avatar
Coupe Racing
RSSOC Member
Posts: 6936
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Has thanked: 6 times
Been thanked: 74 times

Re: se4b wiring loom

Post by Coupe Racing » Tue Jun 20, 2017 10:01 am

peter freeman wrote:It should do - send me your email address to peterlfree@outlook.com and I will send the drawing to you - which drawing do you want ? as they are all there.

Email sent


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

Post Reply

Return to “Coupé”