SD1 electric windows and DIY wiring

Have you documented a Scimitar related procedure and would like to share it with others? Pictures are most welcome!
Threads here also contain previous “stickies” from other sections, as a central location for quick reference information.

Moderators: scimjim, erikscimitardemon, Lukeyboy46, Roger Pennington, philhoward

Post Reply
spegru
Posts: 327
Joined: Sun Dec 03, 2017 9:06 am
Location: Brentwood, Essex
Has thanked: 7 times
Been thanked: 7 times
Contact:

SD1 electric windows and DIY wiring

Post by spegru » Tue Aug 13, 2019 9:07 am

My car came without electric windows, so I retrofitted motors from an SD1.
But for the switches I made my own setup using simple buttons from ebay and some reasonably clever relay wiring. I actually used the simplified version with the diodes
2019-08-13 08.32.26.jpg
Simple buttons. On for Up one for down each side. The middle button is for the rear hatch release solenoid
2019-08-13 08.32.26.jpg (257.16 KiB) Viewed 222 times
electric windows.png
Original idea with lots of relays
electric windows.png (102.61 KiB) Viewed 222 times
electric windows v2.png
Simplified with a Diode
electric windows v2.png (111 KiB) Viewed 222 times



User avatar
peter freeman
RSSOC Member
Posts: 9932
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 356 times
Contact:

SD1 electric windows and DIY wiring

Post by peter freeman » Tue Aug 13, 2019 11:38 am

The original simple circuit has a fuse and switches which don't seem to give lot of trouble so why go to such bother unless you cannot get the original switches now.



Post Reply

Return to “How To Guides/FAQs”