Power steering pipes.

Moderators: scimjim, Lukeyboy46, erikscimitardemon, Roger Pennington, philhoward

Post Reply
User avatar
RSSOC Member
Posts: 637
Joined: Fri Aug 24, 2012 9:09 am
Location: Thomas chapel in Pembrokeshire
Has thanked: 35 times
Been thanked: 44 times

Power steering pipes.

Post by TrevorG » Fri Jan 31, 2020 3:03 pm

I don't know if it's been mentioned before, but I thought I'd recheck my workshop manual re layout of the pipes whilst replacing and adding the new ones and voila.....the workshop manual diagram is wrong! The diagram shows the two pipes, feed and return, from the pump the wrong way around (fig 6). If you go to the diagram of the actual rack end close up (fig 7)....that diagram is correct.

Perhaps this is why someone previously mentioned their pipes were on the wrong way round?


Post Reply

Return to “Se6/6a/6b/GTC”