No power to solenoid / starter

Moderators: scimjim, Lukeyboy46, erikscimitardemon, Roger Pennington, philhoward

Post Reply
pmallinson
Posts: 30
Joined: Sun Dec 04, 2011 12:54 pm
Location: Kenmare, County Kerry Ireland
Contact:

No power to solenoid / starter

Post by pmallinson » Tue Nov 10, 2015 3:23 pm

Just one other point if you know, can you tell me if there is a fuse in the feed from the ignition to the solenoid for the starter . If so where is it and what rating should it be. I have lost the feed to the solenoid and can only think I have blown a fuse as I have been raving bout behind the dashboard and centre console



User avatar
toomanysabres
RIP
Posts: 5373
Joined: Sun Nov 12, 2006 1:27 pm
Location: Leatherhead
Has thanked: 14 times
Been thanked: 88 times

Re: No power to solenoid / starter

Post by toomanysabres » Tue Nov 10, 2015 3:51 pm

No fuses in starter & coil system. May have pulled a spade off a Lucar on the ignition switch. Or disturbed the plug on its mini harness. Or if its an auto there is the inhibit relay which prevents starting unless in park or neutral.


Now: '62 Sabre 4, '63 Sabre Six, '65 SE4, '00 BMW E38 740i sport.
Prev: '53 ZephyrZodiac, '64 Sabra GT, '68 Elan S3SE, Mk3 Cortina 2000GXL, Mk4 Cortina 2000 Est, 3 SE6a's, 2 SE5a, SE4a Turbo, 1800Ti.
Company: Cav SRi, Cav SRi 130, Honda Concerto 1.6 (yuk)

Roxyone
RSSOC Member
Posts: 245
Joined: Mon May 25, 2009 11:32 am
Location: Berkshire
Been thanked: 3 times

Re: No power to solenoid / starter

Post by Roxyone » Tue Nov 10, 2015 4:42 pm

Check the contacts in the plug and socket, in wiring loom, beneath the wiper motor.


1983 Se6b in Crystal green metalic

Doubting your chances before you're done may cost you the race you might have won!

Post Reply

Return to “Se6/6a/6b/GTC”