Wanted SE6A Brake compensator

Cars and Parts Wanted

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46, Terry Rickard

Post Reply
Pogle
RSSOC Member
Posts: 13
Joined: Wed May 30, 2018 11:43 pm
Has thanked: 6 times
Been thanked: 1 time

Wanted SE6A Brake compensator

Post by Pogle » Mon Jul 09, 2018 5:00 pm

Hello does anyone have a SE6A PDWA or brake compensator mine is broken and leaking from the pressed steel end. This is becoming a bit of show stopper for me anyone knows of where I can get one please do get in touch thanks.



User avatar
peter freeman
RSSOC Member
Posts: 9137
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 284 times
Contact:

Wanted SE6A Brake compensator

Post by peter freeman » Mon Jul 09, 2018 5:46 pm

Rimmer Bros - SD1 part I think is what you need.



gtcse8
RSSOC Member
Posts: 1232
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 64 times

Wanted SE6A Brake compensator

Post by gtcse8 » Mon Jul 09, 2018 8:25 pm

I have a spare.


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

User avatar
peter freeman
RSSOC Member
Posts: 9137
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 284 times
Contact:

Wanted SE6A Brake compensator

Post by peter freeman » Mon Jul 09, 2018 8:39 pm

Sorry I should have known.



ScimmyMike
RSSOC Member
Posts: 4835
Joined: Sun Mar 15, 2009 6:12 pm
Location: Hyde, Cheshire
Has thanked: 12 times
Been thanked: 95 times

Wanted SE6A Brake compensator

Post by ScimmyMike » Mon Jul 09, 2018 9:50 pm

So do I and no 6 series to use it on


SE4c rebuilding. SE5a similar it seems!
SAAB C900 2 door
Scimitar SE4 SE4c SE5 SE6b Austin A35

High Peak Noggin Secretary & general dogsbody

www.high peak noggin

If you can see the tree before you hit it that's understeer
if you only feel the tree as you hit it that's oversteer

gtcse8
RSSOC Member
Posts: 1232
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 64 times

Wanted SE6A Brake compensator

Post by gtcse8 » Mon Jul 09, 2018 9:55 pm

Put your hand in your pocket and buy another GTE Mike.


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

RonH
RSSOC Member
Posts: 165
Joined: Sun Jan 03, 2016 11:37 am
Location: Newcastle under Lyme
Has thanked: 16 times
Been thanked: 3 times

Wanted SE6A Brake compensator

Post by RonH » Mon Jul 09, 2018 10:13 pm

Hi Mark
Apologies for the interruption folks.
Anything to report on the “butchered” rack?
All the best
Ron



gtcse8
RSSOC Member
Posts: 1232
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 64 times

Wanted SE6A Brake compensator

Post by gtcse8 » Mon Jul 09, 2018 10:33 pm

Yes Ron

I have spent most of this afternoon cleaning and checking the components, in between answering the mobile, which will have to be monitored as I have docs, physios, dentist, muscoskeletal etc etc meetings.

Seals are promised to me Tuesday so I can then rebuild, paint and ship back along with the Three sets of hinge brackets.
Only get chance to sit down and chill on an evening.
Its now 10.30pm.


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

RonH
RSSOC Member
Posts: 165
Joined: Sun Jan 03, 2016 11:37 am
Location: Newcastle under Lyme
Has thanked: 16 times
Been thanked: 3 times

Wanted SE6A Brake compensator

Post by RonH » Mon Jul 09, 2018 10:59 pm

Mark
Thanks once again for taking the time to reply whilst taking a well earned breather.
I’m off to bed now to dream of who knows what’s next :roll:
By the way the Italvolanti boss roll pins were set in too long as you suspected. Also found them at 37mm across pin ctrs - determined by the Scarborough boss pin holes. Instead of the 35mm ctrs. required to pick up indicator stalk cancelling ring. So a little persuasion to bend the pins in 1mm each side fixed the problem.
All the best
Ron



ScimmyMike
RSSOC Member
Posts: 4835
Joined: Sun Mar 15, 2009 6:12 pm
Location: Hyde, Cheshire
Has thanked: 12 times
Been thanked: 95 times

Wanted SE6A Brake compensator

Post by ScimmyMike » Wed Jul 11, 2018 7:19 pm

gtcse8 wrote:
Mon Jul 09, 2018 9:55 pm
Put your hand in your pocket and buy another GTE Mike.
I've got one just a Girling version of braking on it


SE4c rebuilding. SE5a similar it seems!
SAAB C900 2 door
Scimitar SE4 SE4c SE5 SE6b Austin A35

High Peak Noggin Secretary & general dogsbody

www.high peak noggin

If you can see the tree before you hit it that's understeer
if you only feel the tree as you hit it that's oversteer

gtcse8
RSSOC Member
Posts: 1232
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 64 times

Wanted SE6A Brake compensator

Post by gtcse8 » Thu Jul 12, 2018 10:43 am

I meant buy a newer model lol


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

Pogle
RSSOC Member
Posts: 13
Joined: Wed May 30, 2018 11:43 pm
Has thanked: 6 times
Been thanked: 1 time

Wanted SE6A Brake compensator

Post by Pogle » Mon Jul 16, 2018 5:05 pm

Thanks to everyone who Helped or responded. I now have a compensator on the way to me, thanks Mark.



Post Reply

Return to “Wanted”