American Racing Vector Alloys 14x7J - SOLD.

Old ads will stay here for a while before being kicked out forever after 6 months or so.

Moderators: scimjim, Lukeyboy46, erikscimitardemon, Roger Pennington, philhoward, Terry Rickard

User avatar
1969SE5
Posts: 611
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire
Has thanked: 5 times
Been thanked: 7 times

American Racing Vector Alloys 14x7J - SOLD.

Post by 1969SE5 » Wed Nov 06, 2019 7:37 pm

Hi All

would there be any interest in a straight set of 4 of the above ? same wheels as the General Lee !! been stripped ready for paint and polish by the guy i bought them off. 15 inch by 8 on the tape so 7J ? Actual wheel diameter (tyre size) is 14 inch

will get some pics up later if any interest... i am open to offers, as thinking of sticking with my PA's now......

cheers
Last edited by 1969SE5 on Tue Nov 12, 2019 8:18 am, edited 3 times in total.


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

User avatar
1969SE5
Posts: 611
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire
Has thanked: 5 times
Been thanked: 7 times

American Racing Vector Alloys

Post by 1969SE5 » Wed Nov 06, 2019 9:02 pm

general lee.jpg
general lee.jpg (71.96 KiB) Viewed 358 times


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

User avatar
1969SE5
Posts: 611
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire
Has thanked: 5 times
Been thanked: 7 times

American Racing Vector Alloys

Post by 1969SE5 » Wed Nov 06, 2019 9:03 pm

IMG_20191106_192551.jpg
IMG_20191106_192551.jpg (128.83 KiB) Viewed 357 times
IMG_20191106_192556.jpg
IMG_20191106_192556.jpg (133.42 KiB) Viewed 357 times
IMG_20191106_192602.jpg
IMG_20191106_192602.jpg (127.08 KiB) Viewed 357 times
IMG_20191106_192639.jpg
IMG_20191106_192639.jpg (86.12 KiB) Viewed 357 times
IMG_20191106_192653.jpg
IMG_20191106_192653.jpg (89.92 KiB) Viewed 357 times


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

User avatar
Oaksey
RSSOC Member
Posts: 5749
Joined: Fri Mar 23, 2012 9:45 pm
Location: Cheshire
Has thanked: 38 times
Been thanked: 138 times
Contact:

American Racing Vector Alloys

Post by Oaksey » Wed Nov 06, 2019 9:10 pm

I could be interested. I don't like making offers in case I offend though :)


Josh Oakes
2015, 2016, 2017 and 2018 SSSC Champion
1974 Yellow Se5a Overdrive
1971 Blue Jaguar XJ6
1966 Blue Coupe Straight Six
1973 Beige Se5a Overdrive
2005 Honda S2000
2014 BMW 330d xDrive
Previous- Coupe S6,
SS1 Ti, E90 SS1 Ti, SE6a x3, SE5 Auto, SS1 CVH, Mk2 Sabre, Rebel Estate

User avatar
Coupe Racing
RSSOC Member
Posts: 7366
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Has thanked: 20 times
Been thanked: 97 times

American Racing Vector Alloys

Post by Coupe Racing » Wed Nov 06, 2019 9:17 pm

Do you know the offset


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

User avatar
philhoward
RSSOC Member
Posts: 25350
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Has thanked: 65 times
Been thanked: 643 times
Contact:

American Racing Vector Alloys

Post by philhoward » Wed Nov 06, 2019 9:43 pm

If the lip to lip measurement is just over 15”, I’d say they’re 14” diameter.. I’d be surprised if there isn’t something cast inside the back of one of the spokes.


Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

User avatar
1969SE5
Posts: 611
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire
Has thanked: 5 times
Been thanked: 7 times

American Racing Vector Alloys

Post by 1969SE5 » Wed Nov 06, 2019 11:14 pm

Phil, you are of course correct, i am forgetting the basics...14 inch !!

no casting marks that i can find though.........

some more pics to follow, that may help you calc the offset, after failing on the diameter, i'm not going to chance it !! lol


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

User avatar
1969SE5
Posts: 611
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire
Has thanked: 5 times
Been thanked: 7 times

American Racing Vector Alloys

Post by 1969SE5 » Wed Nov 06, 2019 11:15 pm

IMG_20191106_231042.jpg
IMG_20191106_231042.jpg (108.92 KiB) Viewed 302 times
IMG_20191106_231047.jpg
IMG_20191106_231047.jpg (143.34 KiB) Viewed 302 times
IMG_20191106_231103.jpg
IMG_20191106_231103.jpg (104.24 KiB) Viewed 302 times
IMG_20191106_231111.jpg
IMG_20191106_231111.jpg (110.59 KiB) Viewed 302 times


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

User avatar
Oaksey
RSSOC Member
Posts: 5749
Joined: Fri Mar 23, 2012 9:45 pm
Location: Cheshire
Has thanked: 38 times
Been thanked: 138 times
Contact:

American Racing Vector Alloys

Post by Oaksey » Wed Nov 06, 2019 11:21 pm

Looks around ET5 to me? But as they're not 15", they're no good for me :)


Josh Oakes
2015, 2016, 2017 and 2018 SSSC Champion
1974 Yellow Se5a Overdrive
1971 Blue Jaguar XJ6
1966 Blue Coupe Straight Six
1973 Beige Se5a Overdrive
2005 Honda S2000
2014 BMW 330d xDrive
Previous- Coupe S6,
SS1 Ti, E90 SS1 Ti, SE6a x3, SE5 Auto, SS1 CVH, Mk2 Sabre, Rebel Estate

User avatar
1969SE5
Posts: 611
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire
Has thanked: 5 times
Been thanked: 7 times

American Racing Vector Alloys 14x7J

Post by 1969SE5 » Wed Nov 06, 2019 11:27 pm

duke 1.jpg
duke 1.jpg (13.82 KiB) Viewed 299 times
duke 2.jpg
duke 2.jpg (11.84 KiB) Viewed 299 times


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

User avatar
Coupe Racing
RSSOC Member
Posts: 7366
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Has thanked: 20 times
Been thanked: 97 times

American Racing Vector Alloys 14x7J

Post by Coupe Racing » Thu Nov 07, 2019 8:05 am

What's the PCD please


Blessed are the Cheese makers

Better to be an hour early than 1 minute late

User avatar
1969SE5
Posts: 611
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire
Has thanked: 5 times
Been thanked: 7 times

American Racing Vector Alloys 14x7J

Post by 1969SE5 » Thu Nov 07, 2019 10:32 am

114.3 so straight on !!


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

henspeed
Posts: 49
Joined: Tue Sep 13, 2016 11:30 am
Location: Caithness (Highlands)

American Racing Vector Alloys 14x7J

Post by henspeed » Thu Nov 07, 2019 12:05 pm

potentially interested if the price is right



User avatar
1969SE5
Posts: 611
Joined: Tue Nov 06, 2012 11:36 pm
Location: Kidderminster, Worcestershire
Has thanked: 5 times
Been thanked: 7 times

American Racing Vector Alloys 14x7J

Post by 1969SE5 » Thu Nov 07, 2019 1:00 pm

open to offers to test the water, i know what i paid, and have no need to sell, but if the offer was right....there gone !!


“Speed has never killed anyone, suddenly becoming stationary… that’s what gets you.”

henspeed
Posts: 49
Joined: Tue Sep 13, 2016 11:30 am
Location: Caithness (Highlands)

American Racing Vector Alloys 14x7J

Post by henspeed » Thu Nov 07, 2019 1:01 pm

as per oaksey, not keen on this making offers thing.
need a price



Locked

Return to “Removed For Sale and Ebay”