Mikey Bikey's Scimega

If you have a long-term project and would like to share/document progress, this is for you.

Moderators: scimjim, Lukeyboy46, Roger Pennington, philhoward, erikscimitardemon

lozzzzzz
Posts: 1339
Joined: Sat Jan 06, 2007 3:23 pm
Location: Westmids
Has thanked: 3 times
Been thanked: 13 times

Mikey Bikey's Scimega

Post by lozzzzzz » Wed Jul 31, 2019 10:04 am

I've not checked in for a while, just had a good read through while my wife drives us down the M5.

This is seriously impressive stuff Mike! The flywheel research and experimentation was excellent work! And i particularly enjoyed reading about the gear linkage work inly for it to be not good enough and binned :)

Loving this project! Keep up the excellent work!!!!


loz

User avatar
MikeyBikey
Posts: 5914
Joined: Thu Mar 11, 2010 1:55 pm
Location: Sunny Falmouth. :)
Has thanked: 269 times
Been thanked: 133 times

Mikey Bikey's Scimega

Post by MikeyBikey » Wed Jul 31, 2019 8:24 pm

Thanks matey. Might need your advice very soon. I’m hoping to start her over the weekend using the canems ecu and base map. Although the ecu is only set up to run on lpg so might have made things a tad more difficult than I needed to. I Should have ordered the dual fuel map, instead we got confused and they sent me an lpg only system, albeit configured to the sparky system the 3.2 omega has...

Which is different to the 3.0 :roll:


Is we sideways yet...

User avatar
MikeyBikey
Posts: 5914
Joined: Thu Mar 11, 2010 1:55 pm
Location: Sunny Falmouth. :)
Has thanked: 269 times
Been thanked: 133 times

Mikey Bikey's Scimega

Post by MikeyBikey » Thu Aug 01, 2019 7:28 pm

So final piece of the jigsaw.
WP_20190801_18_58_32_Pro.jpg
WP_20190801_18_58_32_Pro.jpg (109.26 KiB) Viewed 595 times
and she's built
WP_20190801_19_12_43_Pro.jpg
WP_20190801_19_12_43_Pro.jpg (149.31 KiB) Viewed 595 times
WP_20190801_19_12_51_Pro.jpg
WP_20190801_19_12_51_Pro.jpg (139.13 KiB) Viewed 595 times
WP_20190801_19_12_57_Pro.jpg
WP_20190801_19_12_57_Pro.jpg (153.3 KiB) Viewed 595 times
WP_20190801_19_13_07_Pro.jpg
WP_20190801_19_13_07_Pro.jpg (140.17 KiB) Viewed 595 times

fluids then work out the bleddy ecu programme.


Is we sideways yet...

User avatar
td99
RSSOC Member
Posts: 1772
Joined: Sat Jun 30, 2007 9:37 pm
Location: Eindhoven, Netherlands
Has thanked: 17 times
Been thanked: 28 times

Mikey Bikey's Scimega

Post by td99 » Thu Aug 01, 2019 7:30 pm

Nice work, Beautiful!


Trevor - 1800Ti daily driver
1800Ti DET project, RAV4

User avatar
Corky
RSSOC Member
Posts: 11230
Joined: Sun Sep 24, 2006 5:02 am
Location: Macclesfield
Has thanked: 255 times
Been thanked: 212 times

Mikey Bikey's Scimega

Post by Corky » Thu Aug 01, 2019 7:49 pm

Lovely work Mike.


Steve
Current:- SS1 Ti RG sprint car, Honda S2000, VW Touareg 3.0 V6
Prev:- Sabre Ti, 3xSS1 Ti, SS1 16v Turbo Racer, 5XGTC, 2XSE6B, 2XSE5A, 2XV6 Coupe, Sabre 6
Project Threads & YouTube

“It's not the winning, it's the taking apart that counts"

Benc
RSSOC Member
Posts: 557
Joined: Thu Nov 07, 2013 8:58 pm
Has thanked: 82 times
Been thanked: 38 times

Mikey Bikey's Scimega

Post by Benc » Thu Aug 01, 2019 8:02 pm

Looking good Mr Beecham keep up the good work!



barry_bryan
RSSOC Member
Posts: 43
Joined: Tue Nov 24, 2009 6:13 pm
Location: West Midlands
Been thanked: 5 times

Mikey Bikey's Scimega

Post by barry_bryan » Thu Aug 01, 2019 8:35 pm

fantastic Mikey flippin great well done, Baz


Barry Bryan

User avatar
MikeyBikey
Posts: 5914
Joined: Thu Mar 11, 2010 1:55 pm
Location: Sunny Falmouth. :)
Has thanked: 269 times
Been thanked: 133 times

Mikey Bikey's Scimega

Post by MikeyBikey » Thu Aug 01, 2019 10:18 pm

Thank you. Can’t believe I’m actually adding the oil and water...

The Electrics are also fitted so the engine bay is pretty clean, a look I was keen to achieve


Is we sideways yet...

User avatar
CNHSS1
Posts: 14379
Joined: Tue Aug 22, 2006 5:13 pm
Location: Shrewsbury, Shropshire
Has thanked: 366 times
Been thanked: 305 times
Contact:

Mikey Bikey's Scimega

Post by CNHSS1 » Thu Aug 01, 2019 10:24 pm

Good work fella 8)


Racing is life, everything before and after, is just waiting--Steve McQueen
6 time Class Champ, 2006 & 2014 SSSC Champion

RIP Batmobile, await the Rise of Dark Knight 8)
Sabre 'Light Sabre' 360hp!!
Image

Dcrosby13
RSSOC Member
Posts: 1227
Joined: Mon Mar 28, 2016 5:28 pm
Location: Warrington
Has thanked: 15 times
Been thanked: 55 times

Mikey Bikey's Scimega

Post by Dcrosby13 » Thu Aug 01, 2019 10:28 pm

Awesome work, well done man


I break stuff...... :w

User avatar
turbster
RSSOC Member
Posts: 1881
Joined: Tue Nov 21, 2006 8:06 pm
Location: Huddersfield, West Yorkshire
Has thanked: 64 times
Been thanked: 52 times

Mikey Bikey's Scimega

Post by turbster » Thu Aug 01, 2019 10:59 pm

Nice one Mikey, looking good!! 8)


2005 RSSOC Sprint and Hillclimb champion
LRP 335E SE4a
XRF 976H SE5
www.gtevolution.co.uk
Previous: Sabre Six GT, SE4, SE4a, SE4b, SE5, SE5a x 5, SE6a x 2, SE6b x 2, GTC, Middlebridge x 2, SS1 ti, Sabre 1.4k

User avatar
philhoward
RSSOC Member
Posts: 25255
Joined: Tue Aug 29, 2006 5:41 pm
Location: Staffs, UK
Has thanked: 64 times
Been thanked: 632 times
Contact:

Mikey Bikey's Scimega

Post by philhoward » Fri Aug 02, 2019 6:19 am

That’s tidy...very tidy. Well done!

Go on then - what’s the clip for?


Phil Howard
Scimitarweb Forum Admin
SS1 1600 Rooster Turbo; Sabre Mk1.5, Sabre Mk2
Previous: SE5/5a/SS1 No.1/SS1 Rooster/SS1 1800Ti/SE5a 24 Valve
http://www.ss1turbo.com
Never try and argue with an idiot. They drag you down to their level, then beat you based on experience.

willholderogri
RSSOC Member
Posts: 1002
Joined: Sat Aug 21, 2010 10:47 pm
Location: chippenham
Has thanked: 162 times
Been thanked: 29 times

Mikey Bikey's Scimega

Post by willholderogri » Fri Aug 02, 2019 7:32 am

Looking very good


1962 mini, bedford CA , KR200. morris 1000, mini pickup.several escorts,ford grandad.ford cortina X2 ,astra, SE5A x 2 ,ford focus.

Oldconn
RSSOC Member
Posts: 1643
Joined: Sat Aug 10, 2013 1:09 pm
Location: Haute-Saône,France
Has thanked: 61 times
Been thanked: 90 times

Mikey Bikey's Scimega

Post by Oldconn » Fri Aug 02, 2019 10:43 am

Looks too quick for Curborough........ :D


"When I grow up, I want to be me"
-Kermit Weeks
Current: SE6A; 998 Mini.Previous: Morris Minor,Ford8, Cortinas Mk1 &2,MG Midget 1932,Morgan 3W 1934,Lagonda Rapier,Honda S800, Austin Maxi,Citroen GSA, Riley ElfMk2,Peugeot 505,Rover 420 SDI

User avatar
Roger Pennington
RSSOC Member
Posts: 20106
Joined: Tue Aug 29, 2006 9:43 pm
Has thanked: 155 times
Been thanked: 533 times

Mikey Bikey's Scimega

Post by Roger Pennington » Fri Aug 02, 2019 11:58 am

I love the minimalist engine bay, it looks great! Well done :D


....Roger

RSSOC member (since 1982)
- - - - - - - - - - - - - - - - -
Image

"Condition can be bought at any time; Originality, once lost, is gone forever" - Doug Nye

Post Reply

Return to “Project Progress”