Stainless Steel Door hinge mountings

PLEASE ONLY start a NEW topic if you have a specific part that hasn't got a topic already, and that you need and cannot get hold of through Club Traders. Make the topic name clear (Model and Part details). Anyone else also wanting that part should add a message to the topic.

Moderators: scimjim, philhoward, erikscimitardemon, Roger Pennington, Lukeyboy46

Diyhell
RSSOC Member
Posts: 246
Joined: Sun Apr 12, 2015 7:27 pm
Location: Edinburgh
Has thanked: 54 times
Been thanked: 11 times

Stainless Steel Door hinge mountings

Post by Diyhell » Wed Jun 06, 2018 8:09 pm

Got mine today, looking good! Thanks Mark.


SE6a needing lots of work...

scimitargtc
RSSOC Member
Posts: 195
Joined: Sun Jun 14, 2009 9:05 am
Location: EAST YORKSHIRE UK
Has thanked: 2 times
Been thanked: 4 times

Stainless Steel Door hinge mountings

Post by scimitargtc » Wed Jun 06, 2018 8:38 pm

Mark, set for 6a do I just pay you and if so how please

Thanks

Richard


1979 se6a auto pas 3.0v6
1998 Range Rover 4.6 v8 auto
2006 fiat Punto 1.2
2016 Nissan QashQai 1.6 tekna CVT dci

gtcse8
RSSOC Member
Posts: 1250
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 65 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Thu Jun 07, 2018 9:42 am

Hi Richard

Bank transfer please, paypoo have locked me out of my account as I refuse to send them my passport or driving license.

How many other users have they demanded photograph evidence of identity from?.

PM sent with details, and next batch will be produced next week after material is delivered.

Mark


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

User avatar
Stornoway Grey
Posts: 231
Joined: Thu Jun 25, 2009 4:58 pm
Location: Newtown, Powys
Has thanked: 33 times
Been thanked: 3 times

Stainless Steel Door hinge mountings

Post by Stornoway Grey » Thu Jun 07, 2018 4:13 pm

Mark,
could I please have a set for one door of a SE6a?
Regards, Adam



gtcse8
RSSOC Member
Posts: 1250
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 65 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Thu Jun 07, 2018 7:06 pm

Yes Adam
Not a problem.
£13 for the plates and All fittings, will have to get a posting cost though.
Will PM you with bank details and Full cost ASAP.

Regards Mark


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

alanishep
RSSOC Member
Posts: 6
Joined: Mon Jun 06, 2016 5:07 pm

Stainless Steel Door hinge mountings

Post by alanishep » Fri Jun 08, 2018 9:54 am

You can use stainless nuts and bolts on assembly if you coat threads with ROCOL® ANTI-SEIZE Stainless is a nickel-free antiseize paste specifically designed for nimonic, stainless and silver coated fasteners particularly those subjected to high temperatures for long periods in the aerospace and power generation industries.
It is designed for use as an assembly and anti-seize lubricant to prevent pick up and seizure even in extreme environmental conditions.
ROCOL ANTI-SEIZE Stainless does not contain copper and exhibits extremely low sulphur and chlorine levels making it ideal for use on exotic alloys often found in the aerospace and other associated industries.
ANTI-SEIZE Stainless was formerly known as ASC251T.
I have used this many times with no problems (bit expensive though)

Alan



gtcse8
RSSOC Member
Posts: 1250
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 65 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Fri Jun 08, 2018 1:42 pm

Yes Alan

I posted that ROCOL was MOD approved on the parts I fitted.

Can`t remember who to tho LOL.
Mark


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

gtcse8
RSSOC Member
Posts: 1250
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 65 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Sat Jun 16, 2018 8:29 pm

Next batch of Coupe and GTE sets now ready if any more takers?.

I have PM`d most of the original requesters and can only think the Non Responders are away??.


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

User avatar
peter freeman
RSSOC Member
Posts: 9212
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 291 times
Contact:

Stainless Steel Door hinge mountings

Post by peter freeman » Sat Jun 16, 2018 8:30 pm

I have not had a PM from you but have emailed you - no hurry as I said in my mail.
Peter



gtcse8
RSSOC Member
Posts: 1250
Joined: Fri Apr 24, 2009 10:11 am
Location: Steeton, Yorkshire Dales
Has thanked: 8 times
Been thanked: 65 times

Stainless Steel Door hinge mountings

Post by gtcse8 » Sat Jun 16, 2018 8:38 pm

Peter your Two sets are boxed up, I sent you a gmail message last week including the question about the PAS pump at Seaburn and Hylton??.

I am now looking at remanufacturing in this same stainless the clamp plates for the leading arm/A post clamps for the SE6 onwards window frames.


See the Beast on youtube under" RELIANT SCIMITAR CONVERSION LOL.,Se5,Se5a, Se6a, Two Se6b`s, GTC, SST 1800Ti & not a lot of sense

User avatar
peter freeman
RSSOC Member
Posts: 9212
Joined: Thu Aug 31, 2006 12:12 pm
Location: Newcastle
Has thanked: 9 times
Been thanked: 291 times
Contact:

Stainless Steel Door hinge mountings

Post by peter freeman » Sat Jun 16, 2018 8:41 pm

I hope you have the pump by now- we are back from the inter on 5July so you can send them any time after that - how much do you want from me by the way - best I send you the money before we go.



User avatar
Geraint SabreGTCse5
RSSOC Member
Posts: 801
Joined: Wed Dec 20, 2006 8:27 pm
Location: North Wales
Been thanked: 33 times

Stainless Steel Door hinge mountings

Post by Geraint SabreGTCse5 » Sat Jun 16, 2018 9:49 pm

Mark I haven't had a PM either


Geraint

Sabre ti, se5, GTC, 6b.......

Better to be late in this life than early in the next!

User avatar
mn757
RSSOC Member
Posts: 443
Joined: Tue Dec 19, 2006 2:34 pm
Location: Coventry
Has thanked: 14 times
Been thanked: 10 times

Stainless Steel Door hinge mountings

Post by mn757 » Sat Jun 16, 2018 11:04 pm

Not had a PM either, still interested in purchase.


1965 Scimitar GT SE4
1976 Scimitar GTE SE6
1985 SS1 1300 5 Speed


also...
1974 Lambretta Li125, 1957 Francis Barnett, 1960 Matchless G2, 1960 Mobylette, 1957 Victoria Nicky, 1976 Puch MS50D, Royal Enfield Bullet 350cc, 2005 MG ZT-T

Previous - 1970 SE5, 1976 SE6, 1979 SE6a, 1977 Scimitar GTE SE6a 3500 V8

mick_gaugh
RSSOC Member
Posts: 271
Joined: Sun Oct 22, 2006 8:31 pm
Location: Northants
Has thanked: 27 times
Contact:

Stainless Steel Door hinge mountings

Post by mick_gaugh » Sat Jun 16, 2018 11:15 pm

Hi Mark

I have not had a message either but still want mine.

I do need to sort out this week before I go away.

All the best

Mick



BusaPhill
RSSOC Member
Posts: 147
Joined: Sun Jun 28, 2015 10:28 pm
Location: Sutton,Surrey.
Has thanked: 1 time
Been thanked: 4 times
Contact:

Stainless Steel Door hinge mountings

Post by BusaPhill » Sun Jun 17, 2018 5:37 am

Mark.
No PM here.
One car set SE6a.

Thanks
Phill..


1979 Scimitar SE6A V6 3.1 4speed Auto
2005 Mercedes C320 V6 3.0 7speed Auto (Diesel Daily Driver).

Post Reply

Return to “Parts Re-Manufacture Requests”