SE5 Green and Blue Wire near Coil

Discuss and exchange views and technical information about our cars.

Moderators: scimjim, Lukeyboy46, erikscimitardemon, Roger Pennington, philhoward

Post Reply
User avatar
Posts: 50
Joined: Sat Mar 12, 2016 6:20 pm
Location: Surrey

SE5 Green and Blue Wire near Coil

Post by jibowski » Wed Jul 25, 2018 7:04 pm

I've found a green and blue wire loose in my engine bay on the part of the loom that goes to the coil and distributor, it has a female spade connector with a broken off male part inside, could anyone please tell me where it should go?

Thanks again!


User avatar
RSSOC Member
Posts: 36376
Joined: Sun Oct 01, 2006 10:08 pm
Location: Gloucester
Has thanked: 116 times
Been thanked: 853 times

SE5 Green and Blue Wire near Coil

Post by scimjim » Wed Jul 25, 2018 7:11 pm

The temp sender.

Jim King

Current: SE5 (8Ball), TI SS1 (snotty), 1600 SS1 (G97), 1600 SS1 (C686CCR), 2.5TD SE5a (diesel 5a), 6 x random other SS1s.
Previous: SE5, 3 x SE5a, 2 x SE6a, 3 x SE6b, GTC, 2.9i GTC, 3 x 1600 SS1, 1300 SS1, Mk1 Ti Sabre, Mk1.5 CVH Sabre
Chief mechanic for: 1400 K series SS1 (Megan3), 1400 CVH EFi SS1 (Grawpy), Sabre/MX5 auto (The Flying Broomstick),
1300 SS1 (Number One) & Sarah's coupe.

User avatar
Coupe Racing
RSSOC Member
Posts: 7176
Joined: Mon Jul 23, 2007 10:51 pm
Location: Nr Telford - Shropshire
Has thanked: 14 times
Been thanked: 87 times

SE5 Green and Blue Wire near Coil

Post by Coupe Racing » Wed Jul 25, 2018 7:27 pm

yep thought I recognised it

Blessed are the Cheese makers

Better to be an hour early than 1 minute late

Post Reply

Return to “General Technical Discussion”