ScimitarWeb

Most of the modern wiper arm go on a slim [around 8mm] spline and the arm is secured with a nut. To fit that type of arm would require a replacement wiper motor/remote fitting

can see it would be to much of a task to adapt a modern motor and lift gear to work

poo !!!

This is on Ebay anybody got a way to move it I would like the seats
https://www.ebay.co.uk/itm/163860802038 ... 8rwZlKga-4

Ill collect that PM you

Rocking horse poo I’m afraid - obviously shared with all 6 series (SE6, 6a, 6b, Middlebridge) and the TVR S. You might find something in really bad condition off a breaker (like this , but the few that have them are unlikely to sell their spare IME (I’ve been looking for one in excellent condition ...

nobody got a spare ? how about alternatives ?

My petrol cap has fell apart the inner bit that seals on the neck it was rusty so anybody got a cap going spare ?

Thank
Steve

A little job I needed to do was make to make the wipers clear the screen the blades fitted are rubbish standard blade.JPG So I modded the wiper arms to take the hook style fitting the steel is proof of concept ill get some arms to mod, or make the ends from stainless hook end.JPG Iv gain a good high...

Hello
Can I get One of these ?
Thanks
Steve

scimjim wrote: ↑

Tue Sep 03, 2019 9:19 pm

what temp is the fan coming on/off at?

Temps on video and you can here the fan running time
https://www.youtube.com/watch?v=1povfPg-yHw
https://www.youtube.com/watch?v=lpLhrzQy64g

On a side note while using the thermal camera this is the temp of the fuse on the standard fan with standard wiring I would recommend fitting a relay in the circuit to prevent melted fuse box or worse fire that was 4 or 5 runs of the fan

Iv took a couple of videos of the fan/rad a thermal camera the first video is the standard factory set up which in traffic the temp gauge would slowly keep rising the fan cant maintain 90 ish degrees in trafficand the fan was running for 9 seconds standard fan.JPG https://www.youtube.com/watch?v=1po...

So on reading this thread I have had a look at mine not working correctly turned out the fault was a broken [rust] carbon brush spring BUT ............. in the parked position on the body the wiper wont get on to the screen it jams on the frame and when parking again the blade wont jump over the scr...

Trevor G
Thanks for digging them out but wrong colour.

So guys still need seat/s