Search found 20 matches

by Shaun Pierce
Wed Jan 23, 2019 11:36 pm
Forum: Non-Technical Discussion
Topic: North Coast 500
Replies: 12
Views: 1316

North Coast 500

I am planning on doing the NC500 either this year or next in my SE5a and would be happy to join up with other like minded folks. Just need to get the car back on the road after re-doing the carpet, headlining and electrics. Looking at 1,500 mile round trip as I live in the south.

Regards,
Shaun
by Shaun Pierce
Fri Jun 02, 2017 7:40 pm
Forum: Se6/6a/6b/GTC
Topic: Hardtop bracket
Replies: 43
Views: 5817

Re: Hardtop bracket

Hi Geraint,

You could try Harrision's Trim Supplies for a product called Veltrim.

It comes in different colours and is used on VW campers.

I plan on using this on my Portafold caravan

Regards,
Shaun
by Shaun Pierce
Tue Apr 12, 2016 9:29 pm
Forum: Car Shows
Topic: Drive it Day 24th April
Replies: 3
Views: 1008

Re: Drive it Day 24th April

The Berkshire Noggin are planning a tulip rally starting at The New Inn Heckfield at 10:00 on Drive It Day.
by Shaun Pierce
Sun Mar 27, 2016 9:21 pm
Forum: General Technical Discussion
Topic: wheel studs
Replies: 13
Views: 1599

Re: wheel studs

Hi there, I got 1/2" longer wheel studs from Summit Racing. Standard front studs on a SE5a measure as follows; thread size 1/2" length 1 1/2" knurl dia. 9/16" (0.582") shoulder 11/32" The rear studs on mine where different from the front, no knurl, about 1mm smaller diameter and counter sunk head as...
by Shaun Pierce
Sat Mar 12, 2016 7:56 am
Forum: General Technical Discussion
Topic: What is the standard offset of the GTE steel wheelrim?
Replies: 23
Views: 1506

Re: What is the standard offset of the GTE steel wheelrim?

Wolfrace 6x14x.105 OUT, rim width 7" (6" tyres), backface to inside rim 3 3/4" Wolfrace 7x15x.125 IN, rim width 8" (7" tyres), backface to inside rim 4 1/4" Dunlop 5Jx14, rim width 6 1/2" (5 1/2" tyres), backface to inside rim 3 3/4" Steel Wheels 14' (4 slots & 8 holes), rim width 6 1/2" (5 1/2" tyr...
by Shaun Pierce
Fri Dec 18, 2015 12:13 am
Forum: Parts Re-Manufacture Requests
Topic: 15x7 Slot Mags (not Wolfrace)
Replies: 19
Views: 5459

Re: 15x7 Slot Mags (not Wolfrace)

This is the alternative which is readily available and cheaper but I prefer the look of the 70's wheel
Slot Mag.jpg
Slot Mag.jpg (58.76 KiB) Viewed 1988 times
by Shaun Pierce
Fri Dec 18, 2015 12:10 am
Forum: Parts Re-Manufacture Requests
Topic: 15x7 Slot Mags (not Wolfrace)
Replies: 19
Views: 5459

Re: 15x7 Slot Mags (not Wolfrace)

This is my wheel, first picture is 15x7 that I have given a quick hand polish, 15x7 4x114.3 Front Small.jpg second picture is a 14x7 diamond polished that I bought as described as 15" which they were not 14x7 4x114.3 Front Small.jpg Wish I had figured out how to post pictures at the start of this th...
by Shaun Pierce
Thu Dec 17, 2015 9:57 pm
Forum: Parts Re-Manufacture Requests
Topic: 15x7 Slot Mags (not Wolfrace)
Replies: 19
Views: 5459

Re: 15x7 Slot Mags (not Wolfrace)

As per my first post I did say other wheels are available and cheaper but I prefer the D slot as opposed to the oval slot. Subtle difference but no accounting for taste.
by Shaun Pierce
Thu Dec 17, 2015 9:25 pm
Forum: Parts Re-Manufacture Requests
Topic: 15x7 Slot Mags (not Wolfrace)
Replies: 19
Views: 5459

Re: 15x7 Slot Mags (not Wolfrace)

They are definitely not Wolfrace or Appliance. Follow the links in my second post, not the photos inserted by MikeT of his 14" Wolraces. They do look almost identical to Wolfraces except they are 15x7. No stamp on outside but on the inside. Not really important who made them, just whether people wan...
by Shaun Pierce
Thu Dec 17, 2015 6:07 pm
Forum: Parts Re-Manufacture Requests
Topic: 15x7 Slot Mags (not Wolfrace)
Replies: 19
Views: 5459

Re: 15x7 Slot Mags (not Wolfrace)

Hi Roger,

Trying again, no not Appliance Wheels.

https://www.flickr.com/photos/74680925@ ... 449054816/

https://www.flickr.com/photos/74680925@ ... 449054816/

I will also PM the photos to you just in case this does not work.


Regards,
Shaun
by Shaun Pierce
Thu Dec 17, 2015 12:11 am
Forum: Parts Re-Manufacture Requests
Topic: 15x7 Slot Mags (not Wolfrace)
Replies: 19
Views: 5459

15x7 Slot Mags (not Wolfrace)

Hi All, I have been looking for 15x7 slot mag wheels for some time and whereby there are some available off the shelf new I don't like them as much as an incomplete set of 3 wheels I have from the 70's. These are 15x7 with 114.3 PCD and 4" backspace (identical to 14x6 Wolfrace as measured by myself ...
by Shaun Pierce
Fri Nov 20, 2015 8:07 pm
Forum: Parts Re-Manufacture Requests
Topic: Se5a Quarterlight seal - Remanufactured!
Replies: 168
Views: 32189

Re: Se5a Quarterlight seal - Remanufactured!

Hi All, Update from Victor. 50 sets have been ordered, should be finished in 4 to 6 weeks, these initial 50 sets are already pre sold to the club. Victor is pleased to deal with me direct. He can supply me with as many seals as I require. The price will be the same as listed on Scimweb. Victor's pol...
by Shaun Pierce
Thu Nov 19, 2015 10:42 pm
Forum: Parts Re-Manufacture Requests
Topic: Se5a Quarterlight seal - Remanufactured!
Replies: 168
Views: 32189

Re: Se5a Quarterlight seal - Remanufactured!

Spoke with Victor via PM, his preference is to sell all 50 sets (not yet manufactured but ordered) to the Club so as to recoupe all his outlay in one go. He is still happy to sell to me but it would be from a second manufacturing run if the Club buy the first batch. So standing by to see what happen...
by Shaun Pierce
Wed Nov 18, 2015 11:38 pm
Forum: Parts Re-Manufacture Requests
Topic: Se5a Quarterlight seal - Remanufactured!
Replies: 168
Views: 32189

Re: Se5a Quarterlight seal - Remanufactured!

The following have sent a PM to me looking for seals. 2 - Shaun Pierce 1 - Stu Cole 2 - Viv White (Coco La Blanc) 1 - Kev Monk (monkey) 1 - Guy Betts (guybetts) 3 - Joe (Joe.) The above makes up 10 for Victor's price of AU$225 + shipping + import duty (20%) That is £105 per set + shipping + import d...
by Shaun Pierce
Tue Nov 17, 2015 11:43 pm
Forum: Parts Re-Manufacture Requests
Topic: Se5a Quarterlight seal - Remanufactured!
Replies: 168
Views: 32189

Re: Se5a Quarterlight seal - Remanufactured!

Not sure if there is a list of interested parties, so I will kick this off. Shaun Pierce - 2 sets Stu Cole - 2 sets Also happy to buy 10 sets and re-distribute or co-ordinate as per the above list. Regards, Shaun Pierce Updated list; Shaun Pierce - 2 sets Stu Cole - 1 set Viv White - 2 sets Kev Mon...

Go to advanced search